Step 3 --Seat Tube Assembly
1. Please remove the adjusting knob (pt.D-4) from the main frame (pt.D).
2. Assemble the seat (pt.G-6) to the Slider, The slider can be adjusted in different angles.
Tighten the two Nuts under the Seat using a screwdriver. In addition, the Slider can be
adjusted in horizontal level by loosing the knob.
3. Insert the seat post (pt.G) into the main frame (pt.D), then choose the desired position and
tighten the adjusting knob (pt.D-4). Be sure the knob is always tightened.
Remarks: When you have chosen a desired position, tighten the Seat Post Knob until you
hear a “click”.
M16
1*
To Next Page
Loading...
