SM1790-67 SERIES INSTRUCTION MANUAL
DISPLAY FUNCTIONS
Count up – No preset target, Time will count up from 00:00 to maximum
99:59 with each increment being 1 minute.
Count down – If you are training
with preset Time, Time will count down fro
reset to 00:00.
Each preset increment or decrement is 1 minute between 00:00 to 99:00.
Displays current training speed. Maximum speed is 99.9 KM/H or ML/H.
Accumulates total distance from 0.00 up to 99.9 KM or ML. The user may
preset the target distance data by using UP/DOWN button. Each
increment or decrement is 0.1KM or ML between 0.00~99.9.
Accumulates calorie consumption during training from 0 to maximum
9999 calories.
(This data is a rough guide for comparison of different exercise sessions
which cannot be used for medical treatment.)
User may set up the target pulse from 0 – 30 to 230; and the computer buz
will beep when the actual heart rate is over the target value during
Displays the Rotation Per Minute. Display range 0~999
Workout power consumption
Range 0 ~ 999
In Watt constant mode, computer will keep the preset watt value (setting
User creates resistance level profile.
WATT constant training mode.
To Next Page
Loading...
