Step 3 --Seat Tube Assembly
1. Assemble the seat (G-6) to the slider. The slider can be adjusted in different angles. Tighten
the two nuts under the seat using a screwdriver. In addition, the slider can be adjusted at a
horizontal level by loosening the knob.
2. Insert the seat post (K) into the main frame (G-9), then choose the desired position and tighten
the adjustment knob (G-19). Be sure the knob is always tightened.
Remarks: When you have chosen a desired position, tighten the seat post knob until you hear a
“click”.
1
N-4 Box spanner
N-5 Screwdriver
3
To Next Page
Loading...
