EasyManuals Logo

Case IH Axial-Flow 5088 User Manual

Case IH Axial-Flow 5088
41 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #12 background imageLoading...
Page #12 background image
1 - TO THE OWNER
2
TO THE OWNER
Read this manual before you start the engine or
operate the AXIAL-FLOW
®
Combine. This manual
contains important information about the safe
operation, adjustment and maintenance of your
machine. Refer to the Detail Index at the end of this
manual for locating specific items about your
machine. If you need more information, see your
dealer.
If your Combine is equipped with AFS Yield Monitor
and/or AccuGuide™ refer to your CASE IH Yield
Monitor, AFS Pro 600™ or AccuGuide™ Manual(s)
for operating instructions.
DO NOT operate or permit anyone to operate or
service this machine until you or the other persons
have read this manual. Use only trained operators
who have demonstrated the ability to operate and
service this machine correctly and safely.
This Combine, with standard equipment and
authorized attachments, is intended to be used for
harvesting agricultural food grains such as corn,
wheat, rice, soybeans, etc.
DO NOT use this machine for any application or
purpose other than those described in this manual.
Consult an authorized dealer or CNH America LLC
on changes, additions or modifications that can be
required for this machine to comply with various
country regulations and safety requirements.
Unauthorized modifications will cause serious injury
or death. Anyone making such unauthorized
modifications is responsible for the consequences.
Your dealer can give you assistance with CNH
America LLC approved service and parts. Your
dealer has technicians with special training that know
the best methods of repair and maintenance for your
machine.
Call your dealer if you need any assistance or
information.
Signal Plate Location - Italy Only
Signal plate location is on the rear service ladder.
Signal plate is installed locally by our dealer.
Manual Storage Compartment
Keep the Operator’s Manual in the storage
compartment located behind the operator’s seat on
the Combine. The Operator’s Manual must be
available for use by all operators.
RH06F283
20033351

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Case IH Axial-Flow 5088 and is the answer not in the manual?

Case IH Axial-Flow 5088 Specifications

General IconGeneral
BrandCase IH
ModelAxial-Flow 5088
CategoryFarm Equipment
LanguageEnglish

Related product manuals