SECTION 2 - CONTROLS, INSTRUMENTS AND OPERATION
2ï103
Grease warning !
This warning can only appear when:
• The automatic greasing system is active and
• a problem was detected during a greasing cycle.
The audible alarm will sound and a message will
appear in the message window.
Press the escape key to stop the audible alarm.
After the operator pressed the escape key, the
automatic greasing system indicator in the indicator
bar will blink until a successful greasing cycle has
been completed.
The Greasing system warning message will show up
at every next greasing cycle in which the problem is
detected.
This gives an indication that the problem still exists although
the warning disappeared.
IMPORTANT: The operator has to take a corrective action
to avoid excessive machine usage without grease.
To Next Page
Loading...