12
Transmission programming
There are 4 different modes to program for
proper driving:
ActiveClutch
Delta (Memory shuttle)
Powershift steps in Auto Filed mode
Standard gear
To start the transmission programming
procedure push the PROG button on the
armrest.
1. Press!
1. ActiveClutch
Brings the tractor to a stop, only by pressing
the brake pedal without using the clutch.
2. Delta PROG
To achieve the desired forward/ reverse speed
there is a DELTA (Memory shuttle) available
which allows you to program from
+3 to -3 (powershift gears) according to the
forward powershift gear.
Tractor does not shift groups!
To adjust press +/- on MC.
2. Press!
To Next Page
Loading...
