Case IH Luxxum - Basic Driving Procedures; Range Selection and Direction; Clutch, Shifting, and Stopping

How to drive…
1. Choose Field or Road range.
2. Select driving direction
3. Realease the clutch Æ tractor will start in the standard gear!
4. Shift group 1 to 4 with Shift together with +/- or PS-steps with
just +/- on the MC.
5. To stop the tractor again use the clutch or Powerclutch button on
the MC!
¾ Gearmatch is always active after starting the engine Æ Change
the transmission mode with the button on the Multicontroller!
Powerclutch
1
2
3
4
5