22
EFH
EFH Panel
Two operation modes available:
• Position control for precise
working height of the implement.
turn to the right to increase
value of position control.
controls the exact position
of the front linkage.
1
2
3
1
2
4
3
3
Lowering
throttle
• Pressure control to adjust pressure
imlements transmits to the ground.
turn to the left to increase
value of pressure control.
controls the lifting pressure the
front linkage applies on the
implement.
1
2
4
Limitation
of lifting height
Fully left = float control
full implement weight on the ground.
Fully right = pressure control
full implement weight on front axle.
To Next Page
Loading...
