2000-12
STEP 54
BD06F111
Connect grid heater cable to grid heater. Remove
and discard tag.
STEP 55
BD06F122
Install the heater hose (2) to the rear of the engine,
mount the clamps (3), install the radiator hose (1).
STEP 56
BD06F146
Connect the engine coolant vent hose.
STEP 57
BD06F121
Install the wires to the starter solenoid (3), install the
ground cable (2), and ground strap (1) to the starter.
Remove and discard tags.
STEP 58
BD06F120
Install bolt securing wiring harness (1) clamp to the
engine. Install ground wires (2) to the engine.
STEP 59
BD06F119
Install bolt securing wiring harness clamp to engine.
To Next Page
Loading...
