EasyManua.ls Logo

Case CX130 - General Information: Safety

Case CX130
262 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1 - 2
GENERAL INFORMATION
CASE TRAINING CENTER
AUGUST 2000
SAFETY
To prevent injury always follow the Warning, Caution
and Danger notes in this section and throughout the
manual.
Place a “Do not operate“ tag on the starter switch key
before carrying out any service or repair work on the
machine.
.
WARNING: This symbol means ATTENTION! BECOME
ALERT! YOUR SAFETY IS INVOLVED. The message that
follows the symbol contains important information about
safety. Carefully read the message. Make sure you fully
understand the causes of possible injury or death.
!
WARNING: Read the operator’s manual to
familiarize yourself with the correct control
functions.
!
WARNING: Operate the machine and equip-
ment controls from the seat position only.
Any other method could result in serious
injury.
!
WARNING: This is a one man machine, no
riders allowed.
!
WARNING: Before starting engine, study
Operator’s Manual safety messages. Read
all safety signs on machine. Clear the area
of other persons. Learn and practice safe
use of controls before operating.
It is your responsibility to understand and
follow manufacturers instructions on
machine operation, service and to observe
pertinent laws and regulations. Operator’s
and Service Manuals may be obtained from
your Case dealer.
!
WARNING: If you wear clothing that is too
loose or do not use the correct safety equip-
ment for your job, you can be injured.
Always wear clothing that will not catch on
objects. Extra safety equipment that can be
required includes hard hat, safety shoes, ear
protection, eye or face protection, heavy glo-
ves and reflector clothing.
!
WARNING: When working in the area of the
fan belt with the engine running, avoid loose
clothing if possible, and use extreme cau-
tion.
!
WARNING: When doing checks and tests
on the equipment hydraulics, follow the pro-
cedures as they are written. DO NOT
change the procedure.
!
WARNING: When putting the hydraulic
cylinders on this machine through the
necessary cycles to check operation or to
remove air from a circuit, make sure all peo-
ple are out of the way.
!

Related product manuals