1-1
SECTION 1
GENERAL INFORMATION
This manual describes the operation and mainte-
nance for “L” 700 series mechanical self--leveling
and non leveling agricultural loaders. The informa-
tion in this manual was correct on the date of
publication. If you do not understand an item in this
manual, see your dealer.
An operator’s manual is supplied with each machine
to show the operator the proper way to operate and
maintain the machine. Study and use the information
to make sure you get the best machine performance
and length of service. This machine was designed to
keep service as simple as possible so you can
maintain it with normally available hand tools.
0128
1
Read and thoroughly understand this manual before
operating this machine. If you are an inexperienced
operator, study this manual and get instructions from
an experienced operator. Your dealer can assist you
in learning machine operation and show you proper
operating procedures. Keep this manual readily
available, preferably with the machine. If the original
manual is damaged, get a new one from your dealer.
CAUTION
Read through the entire instruction manual
before you start to use the machine.
CNH reserves the right to make changes in design
and specifications or to add improvements at any
time
without any notice or obligation.
IMPORTANT: Loader frames are designed for
specific tractor models. Do not install a loader frame
on a different model than specified, without obtaining
approval from CNH America LLC.
Installation and operation instructions for certain
attachments and accessories may not be included in
this operator’s manual. Use the publication received
with the item.
0101
2
To Next Page
Loading...
