6-1
SECTION 6
SPECIFICATIONS
LOADER SPECIFICATION
The following specifications are intended to be used
as a general guide. Due to variations in tractor
models, tire size, and hydraulic system, these
specifications apply only to the tractor specified in
each example.
Other tractor models and/or tractor variations may
have different values. Specifications are to current
ASAE Standard S301 .3.
The technical data may vary, depending on the
tractor model and implement.
Loader Model
L780
Tractor Model Series MX MAGNUM
Hydraulic Pressure 3000 psi (207 bar)
Hydraulic Flow 40 gpm (151 l/m)
Front Tires 600 / 70R30
Rear Tires 710 / 70 R42
Wheelbase (WB) 118 in (3000 mm)
Lifting Capacity and Breakout Force at 2930 psi (202 bar) at pivot pin (lb / kg)
Maximum lifting height (lb / kg ) 5950 / 2700
59 in / 1.5 m lift height (lb / kg) 7550 / 3425
Ground line (breakout force) (lb / kg) 8150 / 3697
Lifting Capacity and Breakout Force at 2930 psi (202 bar) at 31.5 in/800mm
forward of pivot pin ( lb / kg)
Maximum lifting height (lb / kg ) 5250 / 2381
59 in / 1.5 m lift height (lb / kg) 6500 / 2948
Ground line (breakout force) (lb / kg) 7000 / 3175
To Next Page
Loading...
