0-8
MAINTENANCE
1. Always wear eye protection when servicing
or repairing the loader.
2. Do not modify, alter or permit anyone else to
modify or alter the loader or any of it’s
components or functions without first
consulting a Case IH dealer. Contact your
dealer with questions about the loader.
3. Escaping hydraulic fluid or diesel fuel under
pressure can penetrate the skin causing
serious injury. To prevent serious personal
injury:
• DO NOT use your hand to check for
suspected leaks under pressure
• Use a piece of cardboard or heavy paper
to search for leaks
• Stop the engine and relieve the pressure
in the system before connecting or
disconnecting hydraulic or diesel lines
and fittings
• Tighten all lines and fittings before
starting the engine and pressurizing the
system
• If any fluid is injected into the skin, obtain
medical attention IMMEDIATELY to avoid
the onset of Gangrene
4. DO NOT tamper with or change the relief
valve settings. The relief valve is preset at the
manufacturer for optimum performance and
safety. Changing the settings may cause
overloading of the tractor hydraulic system
resulting in equipment failure and/or serious
operator injury.
5. When servicing or replacing the pins in the
cylinder ends, bucket, etc., always use a
brass drift. Failure to do so could result in
equipment damage and/or personal injury
due to flying metal fragments.
WHEN YOU SEE THIS SYMBOL
IT MEANS:
ATTENTION!
BECOME ALERT!
YOUR SAFETY IS INVOLVED!
To Next Page
Loading...
