Case WX90 - Section 1 - How to Use; Section 2 - Safety Rules; Section 3 - Specification; Section 4 - Superstructure

HU1-3-1
FEATURES OF THE MANUAL WX90
15501 9-35990
3. FEATURES OF THE MANUAL
3.1 MANUAL COMPOSITION
This service manual is divided into eleven Sections. The Section names and its contents are as below. To
fully use this service manual it is essential to understand how it is organised. Therefore, in order to speed up
the searching of wished subject, it is advisable to carefully read this chapter.
SECTION 1 - HOW TO USE
Begin to read first this Section to know the manual composition. This will help you for subject
searching.
SECTION 2 - SAFETY RULES
Indication on how to avoid dangerous situation during the use and maintenance are given in this
Section. Furthermore safety decals and relate indications used on the machine are listed on this
Section.
SECTION 3 - SPECIFICATION
This Section quotes the specification and data of the machine.
SECTION 4 - SUPERSTRUCTURE
This Section contains the information relate to operation principle of the systems, of the
assemblies and their components located on the machine upper frame. Furthermore the
assembly/disassembly procedures of main devices are quoted.
SECTION 5 - UNDERCARRIAGE
This Section contains the information relate to operation principle of the systems, of the
assemblies and their components located on the machine lower frame. Furthermore the
assembly/disassembly procedures of main devices are quoted.(axles, transmission, travels
motor, etc..).