Case WX90 - Move and Operate Machine Safely

SAFETY PRECAUTIONS
15501 9-35990
SR2-2-5
F3261
FASTEN SEAT BELT
• Should the machine overturn, the operator may
become injured and/or thrown from the cab. Not only,
the operator may be crushed by the overturning
machine resulting in serious injury or even death.
- Prior to operating the machine, thoroughly examine
belt webbing, buckle, and attaching hardware. If
any item is damaged or worn, replace the seat belt
or component before operating the machine.
- Be sure to remain seated with the seat belt securely
fastened at all times when the machine is in
operation to minimise injury hazard in case of
accident.
- After a significant accident, replace the seat belts
even though they do not look damaged.
MOVE AND OPERATE MACHINE SAFELY
• Bystanders can be run over.
- Confirm the location of bystanders before moving,
swinging, or operating the machine.
- Always keep the travel alarm in good working
condition (if equipped).
- It warns people when the machine starts to move.
- Use a signal person when moving, swinging, or
operating the machine in congested areas.
- Coordinate hand signals before starting the
machine.
F2447