EasyManua.ls Logo

Case WX90 - Use Hand Holds and Steps; Adjust the Operators Seat

Case WX90
51 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SAFETY PRECAUTIONS
15501 9-35990
SR2-2-4
USE HAND HOLDS AND STEPS
Falling is one of the major causes of personal injury.
- When you get on and off the machine, always face
the machine and maintain a three-point contact
with the steps and handrails.
- Do not use any control as a handhold.
- Never jump off the machine.
- Never get on and off a moving machine.
- Be careful of slippery conditions of platforms,
steps, and handrails when leaving the machine.
ADJUST THE OPERATOR'S SEAT
A seat poorly adjusted for operator or work
requirements may quickly fatigue the operator
leading to improper operations.
- The seat should be adjusted whenever machine
operator changes.
- The operator should be able to fully press the
pedals and correctly move the control levers with
his back resting against the seat back.
- If not, move the seat fore and aft, and check again.
F1442
F1443

Related product manuals