SAFETY PRECAUTIONS
15501 9-35990
SR2-2-16
RULES FOR ROAD TRANSFER
• The machine is equipped with safety locks to be
used for road transfer.
• When transferring the machine:
- Locate upper carriage towards swinging front
axle. Insert upperstructure anti-swing lock.
- Locate cylinders as shown in the homologation
configuration.
- Lock cylinders (cocks, reference marks).
- Lift stabilizers and/or blade as shown in the
homologation configuration.
- Fit lighting devices as shown in the homologation
configuration, if required by the rules in force in
the country where the machine is being used.
- Set control disconnection switch to OFF position.
- On the road follow the rules regulating traffic.
- DURING ROAD TRANSFERS ALWAYS
DISCONNECT FRONT AXLE LOCK.
To Next Page
Loading...
