CashCode FrontLoad Series - GENERAL SPECIFICATIONS

Rev. 03-2004 Part 1. Operation Manual PAGE 1-7
FrontLoad Bill Validator Series - Operation and Service Manual
GENERAL SPECIFICATIONS
Acceptance:
Bills............................................................................................................lengthwise 4 ways
Barcoded Coupons.....................................................................................two ways, face up
Validation rate..........................................................................96% or higher on first insertion
Width of bill, in mm............................................................................................from 62 to 82
Maximum length of bill, in mm...........................................................................................172
Minimum length of bill, in mm............................................................................................124
Bill escrow...................................................................................................................one bill
Barcoded Coupon specifications:
Encoding standard................................................ANSI/AIM BC2-1995, Uniform Symbology
Specification - Interleaved 2 of 5
Narrow bar width, in mm..........................................................................................0.5 to 0.6
Wide/Narrow Bar Ratio .....................................................................................................3:1
Number of characters..................................................................................................6 to 18
PCS Value (Print Contrast Signal)..............................................................................0.6 min
Time of identificaion, in seconds....................................................................................2.5
(from time of bill insertion to time that credit is issued, in seconds)
Full validation time, in seconds:
Multi-width rontLoad...........................................................................................................4.5
FrontLoad...........................................................................................................................3.5
External interface:
a. Serial Interface, Opto-Isolated.
b. Serial Interface, RS 232C.
c. Isolated Pulse Low Current.
Smart Card (for bill validator with a Smart Card bezel):
Smart Card standard...............................................EMV2000L1 and/or ISO 7816 compatible
Number of supporting payment systems..............................................up to 4 simultaneously
Maximum stacking capacity of new bills in Cassette........................................600 or 1000
Power supply voltage*.............................................................................12 V.D.C. ± 1.0 V
. or 24 V.D.C. ± 4.0 V
Current consumption*:
Operating mode (max)........................... ...................................................................... 2.0 A
Standby.......................................................................................................................... 0.2 A
Power consumption*, W:
Idle mode.......................................................................................................................2.4 W
Validation mode..............................................................................................................12 W
(* for validator without active light bezel)
GENERAL
SPECIFICATION