Contrast
Press and
hold the “F”
key and use
the “up” (to
increase)
and “down”
(to decrease)
the contrast.
Calculator mode
Press and hold the
“F” key and press
the ‘Enter’ key.
This will activate
calculator mode.
Use this function
for adding/subtract-
ing/multipling/
dividing.
1. Place the Cashmaster on a rm even surface, ensure the tray is empty, press ON/OFF.
2. Using the keypad: - Enter (1) Register, (2) Pulls, or (3) Count
- Enter Register number (If prompted to do so)
(Follow on-screen promts)
21
.
0
3
4
5
6
7 8 9
Auto add
Press and hold
the ‘F’ key and
press the ‘PLUS
(+)’ key. This will
toggle Auto Add
state. “ + ” will be
displayed on the
screen when Auto
Add is on.
Bank On/Off
Press and hold
down the ‘F’
key and press
the “Coin UP”
key.
This will allow
your bank to
be activated or
deactivated.
Calibrate
Scoop
Press and
hold down
the “F” key
and press the
‘ON/OFF’ key
and follow
the onscreen
instructions.
Set time/date
Press and hold the ‘F’
key and press the ‘Coin
DOWN’ key. This will
enter the Time/Date
setting. Use the coin
up/down keys to toggle
and use the “PLUS (+)”
and “MINUS (-)” keys to
increase and decrease.
Auto Scroll
Press and hold the
“F” key and press
the “MINUS (-)”
key. This will toggle
AutoScroll state.“ ”
will be displayed on
the screen when
AutoScroll is on.
Bank Setting
Press and hold
down the ‘F’
key and press
the “Bill UP”
key.
This will allow
you to set the
bank amount.
Grams mode
Press both the
“Rolled Coins”
and “Strapped
Bills” key simul-
taneously.
Use this function
to weigh objects
(max 1.5kg).
View Till
Press and
hold the “F”
key and press
the “Till”
key. This will
display infor-
mation for the
current till.
NON CASH - Use for manual entry of non cash
items such as Maestro, Visa
STRAPPED BILLS - Press
to select strapped bills
UP and DOWN - Used to select required
bill/coin denominations
C(CLEAR) - Press and hold
press again to clear the total
PLUS and MINUS - Used to add and subtract
amounts to/from the total
PRINT - Press once for a
print out of the totals
ROLLED COINS - Press to select rolled/loose coins
TILL - Press to save the current till and start a
new one
NUMBERS - Use these for completing manual entries
CE (CLEAR ENTRY) - Press once to clear sub totals
FUNCTION - Used to control access various
functions
ENTER - Use this for completing manual entries
DECIMAL - Only supported in calculator mode
ON/OFF - Press to switch machine on/off.
Fast Key Functions
Getting Started
TRAY
Keypad Layout
Screen Layout
Auto Scroll
Battery in use
Denomination
Coins / Bills
Selected currency
Total / bank indicator
Auto Add
Date
Time
Scoop / No. of pieces
Sub total
Running total
To Next Page
Need help?
General
