1. Place the Cashmaster on a firm even surface, ensure the tray is empty, press key.
2. Insert tray pushing down very firmly until it clicks.
3.
Calibrating cup or scoop: You may only have one cup weight in machine memory at a time, since these do
not weigh the same you need to decide if you will use the scoop or the till cups for coins. Upon first tur
ning unit
on, it will prompt for place empty cup. Now place either cup OR scoop on the hod. To re-calibrate scoop or cup,
see section on other side.
Getting Started
Keypad
Press and hold the “F” key and
press the “DOWN” key. This will
toggle AutoScroll state. An
upward arrow will be displayed
on the screen when AutoScroll is
on.
Auto Scroll
Press and hold down the ‘F’
key and press the
“Coins/Bills” key.
This will allow you to set the
Bank amount.
Bank On/Off
Press and hold down the ‘F’ key
and press the “UP” key.
This will allow Bank mode to be
activated or
deactivated.
Auto add
Press and hold the ‘F’ key and
press the ‘PLUS (C/+)’ key. This will
toggle Auto Add state. “ + ” will be
displayed on the screen when Auto
Add is on.
Press and hold down the “F”
key and press the ‘ON/OFF’
key and follow the onscreen
instructions.
Calibrate Scoop
Mobility
The unit has a built in
battery for mobile use.
Using mobile allows for
remote or on floor counting
to be done. Remember to
recharge after use.
Bank Setting
1c
Scoop
Coins
USD
19.03.2017 11.23
0,00
0,00
Total
Sub total
Battery in use
Denomination
Coins / Bills
Selected currency
Total / Bank indicator
Auto Scroll
Auto Add
Date
Time
Scoop / No. of pieces
Running total
ON/OFF – Press to Switch
machine on/off
COINS / BILLS - Used for selecting
coins, bills or rolls
Features
UP and DOWN - Used to
select required denominations
CLEARING / ADDING -
Used for clearing values
and addng to totals
PRINT - Press once for a printout
(Note: Not intended for Walgreens
money sclaes)
Screen
FUNCTION - Used to
access various
functions
To Next Page
Need help?
General
