Indicators
A Displayed while there is connection
between the watch and a phone.
●
While re-connection with your phone is
being attempted after loss of the
connection, this indicator flashes at
one-second intervals.
●
While re-connection with your phone is
not being attempted after loss of the
connection, this indicator flashes at
two-second intervals.
B Indicates the number of new phone
notifications.
C Displayed while the Airplane Mode is
enabled.
D Displayed when the indicated time is
summer time.
E Displayed during p.m. times while 12-hour
timekeeping is being used.
F Displayed when the alarm snooze
function is enabled.
G Displayed when an alarm is enabled.
H Displayed while the operation sound or
notification sound is disabled.
I Displayed while vibration is enabled.
J Displayed while Auto Light is enabled.
K Displayed when battery voltage is low.
Flashes when battery voltage is
momentarily low.
●
Battery Replacement
appears on the display when battery
voltage goes low. Have the battery replaced.
Request battery replacement from a CASIO
service center or your original retailer.
●
When there is a momentarily large load on
the battery, battery voltage will go low and
will flash on the display. All watch button
operation is disabled while is flashing.
Navigating Between Modes
Your watch has the modes shown below.
●
You can also return to the Timekeeping
Mode directly from any mode besides the
Training Mode by holding down (C) for at
least one second, or by pressing (D).
●
In the Timekeeping Mode, pressing (B)
enters the Training Mode.
●
To go from the Training Mode to the
Timekeeping Mode, first stop training
measurement and then press (D).
C
C
C
C
B
D
C
Notification Mode
Timekeeping Mode Training Mode
Timer Mode
Stopwatch Mode
Training Log Mode
Use the buttons in the illustration above to
navigate between modes.
Watch Operation Guide 3568
9
To Next Page
Loading...
