Casio 3568 - Navigating between Modes; Press (B); Use (A) and (C) to Move the Pointer to

Checking Wireless
Compliance Information
1. Enter the Timekeeping Mode.
l
Navigating Between Modes
2. Hold down (A) for at least two seconds.
This displays the Timekeeping Mode
setting screen.
Pointer
3. Use (A) and (C) to move the pointer to
[REGULATORY].
4. Press (B).
5. Use (A) and (C) to select the information
you want to view.
6. Hold down (C) for at least one second to
return to the Timekeeping Mode.
Copyrights and Registered
Copyrights
●
The Bluetooth
®
word mark and logos are
registered trademarks owned by the
Bluetooth SIG, Inc. and any use of such
marks by CASIO Computer Co., Ltd. is
under license.
●
iPhone and App Store are trademarks of
Apple Inc. in the United States and other
countries.
●
iOS is a trademark or registered trademark
of Cisco Systems, Inc.
●
Android and Google Play
TM
are trademarks
or registered trademarks of Google LLC.
●
Other company names and product names
used herein are trademarks or registered
trademarks of their respective companies.
Software
Use the URL below to access information
about software.
https://s.casio.jp/w/10405en/
Troubleshooting
I can’t pair the watch with a
phone.
Q1
I’ve never been able to establish a
(pairing) connection between the
watch and phone.
Are you using a supported phone model?
Check if the phone model and its
operating system are supported by the
watch.
For information about supported phone
models, visit the CASIO Website.
https://world.casio.com/os_mobile/wat/
Did you install the G-SHOCK MOVE
phone app on your phone?
The G-SHOCK MOVE phone app needs
to be installed on your phone in order to
connect with the watch.
l
A
Install the required app on your
phone.
Did you enable location services?
On your phone, configure the settings
below. For details about setting
procedures, see your phone
documentation.
●
Enable your phone’s location services.
●
Give your phone rights to use the phone
app’s location information.
Are your phone’s Bluetooth settings
configured correctly?
Configure the phone’s Bluetooth settings.
For details about setting procedures, see
your phone documentation.
iPhone Users
●
“Settings”
n
“Bluetooth”
n
On
●
“Settings”
n
“Privacy”
n
“Bluetooth”
n
“G-SHOCK MOVE”
n
On
Android Users
●
Enable Bluetooth.
Other than the above.
Some phones need to have BT Smart
disabled to use the G-SHOCK MOVE
phone app. For details about setting
procedures, see your phone
documentation.
On the Home Screen, tap: “Menu”
n
“Settings”
n
“Bluetooth”
n
“Menu”
n
“BT Smart settings”
n
“Disable”.
I can’t reconnect the watch
and phone.
Q1
The watch will not re-connect with the
phone after they are disconnected.
Is the G-SHOCK MOVE phone app
running?
The watch cannot re-connect with your
phone unless the G-SHOCK MOVE
phone app is running on the phone. On
your phone’s home screen, tap the G-
SHOCK MOVE icon. Perform the
operation shown on the screen that
appears to pair with the watch.
l
D
Pair the watch with your phone
Have you tried turning your phone off and
then back on again?
Turn your phone off and then back on
again, and then tap the G-SHOCK MOVE
icon. Perform the operation shown on the
screen to pair with the watch.
l
D
Pair the watch with your phone
Q2
I can’t connect while my phone is in
the Airplane Mode.
Connection with the watch is not possible
while the phone’s Airplane Mode is enabled.
Disable your phone’s Airplane Mode. On it’s
home screen, tap the “G-SHOCK MOVE”
icon. Next, perform the operation shown on
the screen to pair with the watch.
l
D
Pair the watch with your phone
Q3
I can’t connect while the watch is in
the Airplane Mode.
Exit the watch’s Airplane Mode.
l
Using the Watch in a Medical Facility or
Aircraft
Q4
I changed the phone’s Bluetooth
from enabled to disabled, and now I
can’t connect anymore.
On your phone, turn on Bluetooth. Then on its
home screen, tap the “G-SHOCK MOVE”
icon. Next, perform the operation shown on
the screen to pair with the watch.
l
D
Pair the watch with your phone
Watch Operation Guide 3568
40