Casio 3568 - Page 13

●
D
Pair the watch with your phone
Before you can use the watch in combination
with a phone, you first need to pair them.
1.
Y
Tap the “G-SHOCK MOVE” icon.
2.
Y
Follow the instructions on the display to
advance to the initial setup screen.
This will display a message telling you to
connect with the watch.
●
If your phone is already paired with
another watch
A
Y
On the menu bar, tap “More”.
B
Y
Tap “Watch”.
C
Y
Tap “Manage”.
D
Y
Perform the operation shown on
the screen to prepare to add a new
watch.
3.
X
Enter the Timekeeping Mode.
l
Navigating Between Modes
4.
X
Hold down (A) for at least two seconds.
This displays the Timekeeping Mode
setting screen.
Pointer
5.
X
Use (A) and (C) to move the pointer to
[PAIRING].
6.
X
Press (B).
7.
X
Use (A) and (C) to move the pointer to
[CONNECT].
8.
X
Press (B).
9. Move the phone to be paired with close to
(within one meter of) the watch.
10.
Y
When the watch you want to pair with
appears, follow the instructions on the
display to pair with it.
●
If a pairing prompt message appears,
perform the operation shown on the
phone screen.
●
If pairing fails for some reason, the
watch will return to the state in step 5 of
this procedure. Perform the pairing
procedure again from the beginning.
Pairing completePairing started
Note
●
The first time you start up the G-
SHOCK MOVE phone app, a message
will appear on your phone asking if you
want to enable location information
acquisition. Configure settings to allow
background use of location
information.
●
For information about what to do when
pairing is unsuccessful, see the
information below.
l
I can’t pair the watch with a phone.
●
If your watch is already paired with
another phone, you won’t be able to
select [PAIRING] on the screen in step
5. Unpair your watch from the other
phone before pairing it with your
phone.
l
Unpairing the Watch from a Phone
Auto Time Correction
Your watch can connect with your phone to
adjust the watch’s time setting.
If you leave your watch in the Timekeeping
Mode, it will perform the adjustment operation
automatically as you go about your daily life,
without any operation required by you.
12:30
Important!
●
The watch may not be able to perform
auto time correction under the
conditions described below.
ー
While the watch is too far away from
its paired phone
ー
While communication is not possible
due to radio interference, etc.
ー
While the phone is updating its
system
ー
While the G-SHOCK MOVE phone
app is not running on the phone
Watch Operation Guide 3568
13