Casio 3568 - Page 18

Connection
Connecting with a Phone
Your watch automatically connects with its
paired phone.
The
e
symbol is displayed at the top of the
watch screen while the watch is connected
with a phone.
e
flashes when there is no
connection between the watch and a phone.
●
If the watch is not paired with the phone you
want to connect with, refer to the information
below and pair them.
l
D
Pair the watch with your phone
Important!
●
If you have problems establishing a
connection, it could mean that G-
SHOCK MOVE phone app is not
running on your phone. On your
phone’s home screen, tap the “G-
SHOCK MOVE” icon. Perform the
operation shown on the screen to pair
with the watch.
Unpairing the Watch from a Phone
Unpairing the watch from a phone requires
both the G-SHOCK MOVE phone app and
watch operations.
Note
●
If there is any pairing information
remaining on your phone, delete that
information as well.
●
The watch cannot be unpaired from a
phone while the watch’s Airplane
Mode is enabled. To unpair from your
phone, disable the watch’s Airplane
Mode.
l
Using the Watch in a Medical
Facility or Aircraft
●
Deleting Pairing Information from the G-
SHOCK MOVE phone app
1.
Y
Tap the “G-SHOCK MOVE” icon.
2.
Y
On the menu bar, tap “More”.
3.
Y
Tap “Watch”.
4.
Y
Tap “Manage”.
5.
Y
Tap the watch you want to unpair.
6.
Y
Perform the operation shown on the
screen.
Note
●
Deleting pairing information from the
G-SHOCK MOVE phone app does not
delete data previously transferred from
your watch to the app.
●
Deleting Pairing Information from the
Watch
1.
X
Enter the Timekeeping Mode.
l
Navigating Between Modes
2.
X
Hold down (A) for at least two seconds.
This displays the Timekeeping Mode
setting screen.
Pointer
3.
X
Use (A) and (C) to move the pointer to
[PAIRING].
4.
X
Press (B).
5.
X
Use (A) and (C) to move the pointer to
[UNPAIRING].
Pointer
6.
X
Press (B).
7.
X
Use (A) and (C) to select whether or not
you want to delete the pairing information.
[YES] Deletes pairing information.
[NO] Does not delete pairing information.
8.
X
Press (B).
After pairing information deletion is
complete, [DELETE COMPLETED] will
appear for a few seconds, and then the
Timekeeping Mode setting screen will re-
appear.
9.
X
Press (D) to exit the setting screen.
●
Deleting the phone’s pairing
information
For details about setting procedures, see your
phone documentation.
“Settings”
n
“Bluetooth”
n
Cancel the
watch’s device registration.
If you purchase another phone
You need to perform the pairing operation
whenever you want to establish a Bluetooth
connection with a phone for the first time.
l
Deleting Pairing Information from the
Watch
l
D
Pair the watch with your phone
Watch Operation Guide 3568
18