●
Specifying the Illumination Duration
You can select either 1.5 seconds or three
seconds as the illumination duration.
1. Enter the Timekeeping Mode.
l
Navigating Between Modes
2. Hold down (A) for at least two seconds.
This displays the Timekeeping Mode
setting screen.
3. Use (A) and (C) to move the pointer to
[LIGHT].
4. Press (B).
5. Use (A) and (C) to move the pointer to
[DURATION].
6. Press (B).
7. Use (A) and (C) to select an illumination
duration.
[1.5 SEC.] 1.5-second illumination
[3.0 SEC.] 3-second illumination
8. Press (B) to complete the setting
operation.
After the setting operation is complete,
[SETTING COMPLETED] will appear for
a few seconds, and then the illumination
setting screen will re-appear.
9. Press (D) twice to exit the setting screen.
Note
●
The watch exits the setting operation
automatically after about two or three
minutes of non-operation.
Useful Features
Pairing the watch with your phone makes a
number of the watch’s features easier to use.
Auto time correction
l
Auto Time Correction
Data transfer to a phone
l
Viewing Training Records
l
Viewing Life Log Related Data
Selection of More Than 300 World Time
cities
l
Configuring World Time Settings
In addition, a number of other watch settings
can be configured using your phone.
To transfer data to a watch and to
configure settings, you first need to pair
the watch with your phone.
l
Getting Ready
●
Your phone needs to have the “G-SHOCK
MOVE” phone app installed to pair with the
watch.
Linking with a Phone
While there is a Bluetooth connection
between the watch and phone (Mobile Link),
the watch’s current time setting is corrected
automatically. You can also change the
watch’s other settings.
Also, you can use the CASIO “G-SHOCK
MOVE” app to view training records.
Note
●
For best results with this watch, use of
the latest versions of the smartphone
app and watch software is
recommended.
●
This function is available only while the
G-SHOCK MOVE phone app is
running on the phone.
●
This section describes watch and
phone operations.
X
: Watch operation
Y
: Phone operation
Getting Ready
To use your watch in combination with a
phone, you first need to pair them. Perform the
steps below to pair the watch with a phone.
●
A
Install the required app on your
phone.
In Google Play or the App Store, search for the
“G-SHOCK MOVE” phone app and install it on
your phone.
●
B
Turn on location services
Turn on your phone’s location services.
Note
●
For details about setting procedures,
see your phone documentation.
●
C
Configure Bluetooth settings
Enable the phone’s Bluetooth.
Note
●
For details about setting procedures,
see your phone documentation.
Watch Operation Guide 3568
12
To Next Page
Loading...
