To Next PageTo Next Page
Need help?Do you have a question about the Casio 5673 and is the answer not in the manual?
General| Category | Watch |
|---|---|
| Type | Digital |
| Display | Digital |
| Case and Bezel Material | Resin |
| Glass | Mineral Glass |
| Band Material | Resin |
| Battery Life | 2 years |
| World Time | Yes |
| Stopwatch | 1/100 second |
| Timer | Yes |
| Alarm/Hourly Time Signal | Yes |
| Calendar | Full auto-calendar (to year 2099) |
| Mute Feature | Button operation tone on/off |
| Other Features | 12/24-hour format |
Details water resistance levels and usage precautions for daily use, swimming, and diving.
Discusses band care, tightness, and signs of damage to prevent skin irritation or loss.
Warns against extreme temperatures, impact, and magnetism, which can cause malfunction or timekeeping errors.
Details care for resin and leather components, and advises avoiding chemical contact.
Provides storage instructions and warns about degradation of resin/leather from sunlight and moisture.
Covers care for specific watch components like bands, displays, sensors, and data memory.
Provides general maintenance guidelines, risks of neglect, and battery information.
Lists key watch features including solar charging, time signal reception, world time, alarm, digital compass, and more.
Provides an overview of the watch's analog hands, digital display, buttons, and crown for basic operation.
Explains the various indicators on the watch face, including mode hands and digital display icons.
Guides users on how to switch between different modes (Timekeeping, Compass, Altimeter, etc.) using the watch buttons.
Explains Timekeeping, Compass, and Altimeter modes for time, direction, and altitude readings.
Details Barometer, Altitude Record Recall, Stopwatch, Timer, and Thermometer modes for measurements and data viewing.
Explains how the watch beeps for alarms and hourly signals, and how to set them.
Details how to use the crown and shift analog hands for better display visibility and operation.
Explains the solar charging system and how to charge the watch using light.
Explains how the watch displays its charge level and the meaning of different charge indicators.
Provides charging time estimates and explains the watch's power saving modes.
Details how to illuminate the watch face manually or automatically using the Auto Light feature.
Guides users on enabling Auto Light and selecting illumination duration.
Describes how the watch's time and day settings can be configured using received time calibration signals.
Covers optimal locations, reception ranges, and automatic time signal reception.
Explains the automatic process and how to manage auto time signal reception.
Covers signal indicators, manual reception, and the last adjustment result.
Lists conditions under which time calibration signal reception may not be possible or may lead to incorrect adjustments.
Guides users on manually adjusting time, date, and Home City settings, including summer time.
Explains how to select between 12-hour and 24-hour formats for the time display.
Explains how to view the current time in different cities around the world and UTC.
Details selecting World Time cities, configuring summer time, and swapping home/world times.
Provides step-by-step instructions on how to set and configure alarm times for the watch.
Guides users on how to enable or disable the hourly time signal feature.
Explains how to stop an alarm or hourly time signal from sounding and how to turn them off.
Explains how to interpret bearing readings and take a compass reading.
Guides users on how to calibrate compass readings for accuracy.
Details how to calibrate the compass to indicate true north by setting magnetic declination.
Explains the difference between magnetic north and true north, and how maps typically indicate true north.
Lists precautions for accurate digital compass readings, focusing on magnetism and location.
Explains how altitude is measured and how to check the current altitude reading.
Explains how to interpret the altitude graph displayed by the watch.
Details how to update the reference altitude value (offset) to minimize reading differences.
Explains how to measure altitude differences between two points using a reference altitude.
Guides users on how to select the auto measurement interval for altitude readings.
Explains how to use altitude differential data to navigate towards a destination.
Details manually recording altitude and managing auto-recorded data.
Explains how to select between meters (m) and feet (ft) for the altitude display unit.
Lists precautions related to temperature, impact, and specific activities affecting altitude readings.
Introduces barometric pressure measurement and guides on checking current pressure readings.
Explains how the watch displays pressure graphs to predict weather trends.
Details how the watch indicates pressure differences and alerts to sudden changes.
Guides users on calibrating the pressure sensor for accurate readings.
Explains how to select between hectopascals (hPa) and inches of mercury (inHg).
Introduces the Thermometer Mode for taking current air temperature readings.
Guides users on how to enter the Thermometer Mode to display the current temperature reading.
Details calibrating the temperature sensor for accurate readings, including pre-calibration steps.
Explains selecting temperature units and lists precautions for accurate readings.
Guides users on navigating and viewing different types of recorded altitude data.
Explains how to delete individual altitude records or all recorded data.
Covers using the stopwatch for elapsed time, split times, and first/second place finishers.
Covers timer operations and how to set the countdown start time.
Provides instructions to perform hand alignment adjustment to correct any discrepancies.
Guides users on enabling or disabling the audible tone that sounds when buttons are pressed.
Explains how to enable or disable the power saving function to conserve battery life.
Provides city codes, time zones, and technical specifications for the watch.
Details the technical specifications for various watch functions.
Addresses issues related to the watch's inability to perform time calibration signal reception.
Addresses questions about altitude readings differing or showing errors.
Addresses issues with the digital compass, such as display flashing or error messages.
Addresses issues with barometric pressure, temperature, world time, and alarms.
Addresses issues with hand alignment, screen indications, and crown operations.
Addresses troubleshooting steps when the watch does not work, shows [RECOVER], or [CHARGE] flashing.
