E-31
Applying Effects to a Sound
You can apply a variety of different acoustic effects to the sounds produced by the Digital Keyboard. The built-in effects include a
wide variety of variations that give you access to a selection of general digital effects.
• The Digital Keyboard also lets you apply effects to input from the T-5 (INST IN) jack and T-8 (MIC IN) jack.
The following shows how Digital Keyboard effects are configured.
• Items such as “Reverb Send” that are indicated by the symbol are all mixer settings. For details, see “Using the Mixer”
(page E-38).
• Chorus and DSP cannot be used at the same time.
■ Chorus Effect Mode Configuration
The chorus effect mode is enabled while “Chorus” is selected for the “Chorus/DSP” effect parameter. Chorus and reverb can be
used in the chorus effect mode.
• For information about “Chorus/DSP”, see “Selecting an Effect” (page E-33).
Configuration of Effects
Part Volume/Pan
Reverb Send
Chorus Send
Volume/Pan
Reverb Send
Chorus Send
Mic In
Inst In
Reverb
Chorus
Master
Volume/Pan
Tone Generator
Part A01-A16, B01-B16
External Input
Output
Mono
Stereo
Noise Gate
Auto Level
Control
To Next Page
Loading...
Need help?
General
