Controlling the Sound of a Performance
EN-101
■ To change the part where the effect is applied
1.
Press MENU.
This displays the menu screen.
2.
Use U and I to select the 5 buttons menu that includes ACTV DSP.
3.
Press ACTV DSP.
This turns on Active DSP and displays the Active DSP screen.
4.
Press ACT PART.
This displays the Active DSP part setting screen.
• On this screen as well, you can press CHG PART to select the part whose effect you want to
change the effect, or you can turn a dial to change the effect applied to the part.
To Next Page
Loading...
