Controlling the Sound of a Performance
EN-124
• Splitting the keyboard into two ranges (left, right), and assigning two layered tones to the
right side and a single tone to the left side (pages EN-125, EN-126)
With this configuration, the UPPER1, UPPER2, and LOWER parts are all used (Layer: On, Split:
On).
• Changing the tone setting affects the UPPER2 part when layer is turned on, and the LOWER part
when split is turned on.
• While you are using split and layer together, you can select the tone of the keyboard’s LOWER part.
To Next Page
Loading...
