Recording and Playing the Sounds You Want (Sampling)
EN-222
9.
Rotate the dial to select the unit note value loops.
This displays the –/+ screen.
• After you rotate the dial once to select a number of loops, you can change the selection further
using – and +.
• To go back to the previous screen, press BACK.
10.
Press a keyboard key.
• For sampled melody tones, the sound loops as long as the keyboard key is depressed.
• For sampled drum tones, the sampled sound is played as a loop when you press a keyboard
key. To stop the loop, press the keyboard key again.
• If both the loop function and the arpeggiator are turned on, the arpeggiator is given priority.
To Next Page
Loading...
