— 30 —
To connect to a computer using the CASSIOPEIA USB cable
1. Plug the USB cable into the USB port of your computer.
2. Turn off your CASSIOPEIA.
3. Connect the other end of the USB cable to your CASSIOPEIA.
USB port
CASSIOPEIA USB cable
Required System Configuration
The minimum system configuration required for running ActiveSync
®
3.1 is described below.
ActiveSync
®
3.1 System Requirements
• Microsoft
®
Windows
®
2000, Windows NT
®
Workstation 4.0 with Service Pack 3 or greater, or
Windows 95/98. (U.S. version)
• Desktop computer with a Pentium processor for Windows NT (166MHz required for Windows 2000)
• Desktop computer with a 486/66 DX or higher processor (Pentium P90 recommended) for Windows
95/98
• 16MB of memory for Windows 95/98 (more memory will give improved performance) or Windows
NT Workstation 4.0 (32MB recommended for Windows NT, 64MB recommended for Windows
2000)
• Hard disk drive with 10 to 50MB of available hard disk space (actual requirements will vary based
on selection of features and user’s current system configuration)
• Available 9 or 25-pin communications port (adapter required for 25-pin communication port),
Infrared port, or USB port (available for Windows 95/98 or Windows 2000 only).
• One CD-ROM drive
• VGA graphics card or compatible video graphics adapter at 256 color or higher
• Keyboard
• Microsoft Mouse or compatible pointing device
PC Companion Device Requirements
• Handheld PC: Windows CE Handheld PC versions 2 and 3 with Windows CE Core System version
2.0 or greater
• Palm-size PC: All models and versions
• Pocket PC: All models and versions
Using the CASSIOPEIA USB Cable
You can use the CASSIOPEIA USB cable to connect the CASSIOPEIA directly to a computer.
Important
• See below “Required System Configuration” for the computer system that is required for direct USB
connection.
• The illustration below is just one possible connection configuration. The location and layout of USB
ports vary from computer to computer. See the documentation that comes with your computer for
full details on connecting cables to it.
• You must have ActiveSync installed on your computer in order to exchange data with the
CASSIOPEIA over a USB connection. See the Pocket PC User’s Guide for information on installing
and using ActiveSync.
To Next Page
Loading...
Need help?
General