— 66 —
14. DISASSEMBLY PROCEDURE
Refer to GENERAL GUIDE, PARTS LIST and EXPLODED VIEW in this manual also.
1. Remove a stylus, a lithium battery for
memory backup, a rechargeable
battery and CF card slot cover as shown
to the right photograph.
Refer to GENERAL GUIDE, RESET
OPERATION and BATTERY
REPACEMENT in this manual
concerning how to remove.
2. Remove a black battery and screws
as shown to the right.
3. Open the unit after unhooking using a opener
as shown to the right.
It is recommended to unhook while pulling
the upper case outside
To Next Page
Loading...
