To Next PageTo Next PageWhy does nothing happen when I press the power button on my Casio Cassiopeia E-200 Handhelds?
This issue may occur if the main battery is weak, in which case you should charge the battery pack. Alternatively, there may be an internal malfunction. Try resetting the unit. If resetting doesn't fix the problem, perform a full reset (memory initialize).
What to do if the screen is locked up on Casio Cassiopeia E-200?
If the screen is locked up, it may be due to an internal malfunction. Try resetting the unit. If resetting the unit does not correct the problem, perform a full reset (memory initialize).
What to do if nothing happens when the touch screen is touched on Casio Cassiopeia E-200?
If nothing happens when you touch the screen, it could be that the touch screen is out of calibration, so recalibrate the touch screen. Alternatively, static electricity or another issue may have caused the touch screen to malfunction; in this case, reset the unit. If the touch screen is damaged, contact your original dealer or an authorized CASIO service provider.
Why is operation disabled when the AC adapter is connected to Casio Cassiopeia E-200?
Operation may be disabled when the AC adapter is connected if the main battery is weak; in this case, charge the battery pack. It may also happen if the unit is not mounted on the cradle correctly. Mount the unit on the cradle correctly.
Why does the low backup battery message continue to appear on Casio Cassiopeia E-200 even after I replaced the backup battery?
The low backup battery message might persist even after replacement if the backup battery is upside down. Remove the backup battery, turn it over, and reload it. It can also happen if the backup battery was loaded before the main battery; in this case, remove the backup battery and reload it. The message can also appear if the power was left on while the battery pack was replaced, so turn the power off and then back on again.
Why did replacing the main battery cause malfunction in my Casio Cassiopeia E-200 Handhelds?
Replacing the main battery might cause a malfunction if the main battery is not loaded correctly. Remove and then reload the main battery, making sure the positive (+) and negative (–) poles are oriented correctly. It can also happen if the battery replacement procedure was not followed correctly. Perform a full reset (memory initialize). If the above action does not solve the problem, remove the main battery and contact your original dealer or an authorized CASIO service provider.
Why is the rechargeable battery pack life very short after each charge on my Casio Handhelds?
A short rechargeable battery pack life after each charge suggests that the battery pack is damaged or has reached the end of its service life. Purchase a new battery pack.
What does a message about a data error on the screen of Casio Cassiopeia E-200 mean?
If you see a message about a data error on the screen, it indicates an internal malfunction. Follow the instructions that appear on the screen.
What does some other warning message on the screen of Casio Cassiopeia E-200 mean?
If some other warning message is on the screen, it indicates an internal malfunction. Follow the instructions that appear on the screen.
General| Display Type | TFT LCD |
|---|---|
| Display Resolution | 240 x 320 pixels |
| Processor Speed | 131 MHz |
| RAM | 32 MB |
| ROM | 16 MB |
| Operating System | Windows CE 3.0 |
| Battery | Rechargeable Lithium-ion |
| Expansion Slots | CompactFlash Type II |
| Display Size | 3.5 inches |
| Input Method | Touchscreen, stylus |
| Display Colors | 65, 536 colors |
| Connectivity | Infrared |
