To Next Page

To Previous Page

— 22 —

Using the Serial Cable (20-pin)

You can use the serial cable to connect the CASSIOPEIA directly to your computer.

Important

• See "Required System Configuration" on the later page for the computer system that is required

for direct serial connection.

• Be sure to turn off the CASSIOPEIA and your computer before connecting the CASSIOPEIA.

• The illustration below is just one possible connection configuration. The location and layout of

serial ports vary from computer to computer. See the documentation that comes with your

computer for full details on connecting cables to it.

• You must have ActiveSync installed on your computer in order to exchange data with the

CASSIOPEIA over a serial connection. See the Pocket PC User's Guide for information on

installing and using ActiveSync.

• Connect the CASSIOPEIA to your computer as shown in the illustration below.

Serial cable (20-pin)

Using the CASSIOPEIA USB Cable

You can use the CASSIOPEIA USB cable to connect the CASSIOPEIA directly to a computer.

Important

• See "Required System Configuration" on the later page for the computer system that is required

for direct USB connection.

• The illustration below is just one possible connection configuration. The location and layout of USB

ports vary from computer to computer. See the documentation that comes with your computer for

full details on connecting cables to it.

• You must have ActiveSync installed on your computer in order to exchange data with the

CASSIOPEIA over a USB connection. See the ActiveSync Help for details about setting up and

using ActiveSync.

Casio CASSIOPEIA EG-800 Service Manual And Parts List

Other manuals for Casio CASSIOPEIA EG-800