32
Charging the Battery Pack
1. Install the battery pack into the CASSIOPEIA.
2. Attach the AC adapter to the cradle and place the CASSIOPEIA onto the cradle.
• Charging starts automatically as soon as you place the CASSIOPEIA onto the cradle.
• The charge indicator is amber while charging is in progress, and turns green when
charging is complete.
• It takes about four or five hours to reach full charge.
• You can use your CASSIOPEIA while the battery pack is charging.
Important
• Do not use the CASSIOPEIA while it is charging for the first time after you
purchased it or for the first time after you installed a newly purchased battery pack.
• If the battery pack does not achieve full charge after the normal charge time, unplug
the AC adapter from the CASSIOPEIA to stop charging.
Remove the CASSIOPEIA from the cradle after charging is complete.
The following illustration shows how to connect the AC adapter directly to the
CASSIOPEIA for charging.
• Charging starts automatically as soon as you attach the AC adapter to the CASSIOPEIA.
• Direct connection charging conditions are the same as those described for cradle
charging above.
To Next Page
Loading...
