Controlling the Keyboard Sounds
EN-15
5.
Pressing
cr
again to unsplit the keyboard (so it
plays only the tone you selected in step 1).
• Each press of
cr
toggles between split (two tones) and
unsplit (one tone).
• If you turn on both layer and split, layering will be applied to
the right side range of the keyboard only.
1.
While holding down
cr
, press the keyboard key
where you want the split point to be.
The key you press will become the lowest note of the right
side range of the split keyboard.
The Hall function lets you instantly configure the Digital Piano
to play with the acoustic effect of a classic concert hall.
1.
Press
bs
(HALL) to turn on the Hall function.
2.
To turn off the Hall function, press
bs
again.
• The reverb setting turns off automatically whenever the
Hall function is turned on. When you turn off the Hall
function, the reverb setting will return to whatever it was
before you turned on the Hall function.
Reverb adds reverberation to notes. You can change the
duration of the reverb.
1.
Press
ck
(FUNCTION) and then use the
br
(10-key) [4] (U) and [6] (I) keys to display
“Reverb” (page EN-7).
2.
Use the
br
(10-key) [–] and [+] keys to select
the reverb setting you want.
• Changing the reverb setting (including turning it off) while
the Hall function is turned on will turn off the Hall function.
Chorus is a function that adds depth and breadth to notes. It
makes you sound as if you are playing multiple instruments.
1.
Press
ck
(FUNCTION) and then use the
br
(10-key) [4] (U) and [6] (I) keys to display
“Chorus” (page EN-7).
2.
Use the
br
(10-key) [–] and [+] keys to select
the chorus type you want.
There are five chorus types, plus an off setting.
• The actual effect produced by chorus depends on the tone
you are using.
To change the split point
Example: Setting middle C (C4) as the split point.
Using Hall
C4
Key name
Lights
The indicator will disappear when the Hall function is turned off.
Using Reverb
Off (oFF) Turns off reverb.
1 to 10 The larger the number selected, the longer
the reverb duration.
Using Chorus
Reve r b
Indicator disappears when reverb is turned off.
Cho r us
Indicator disappears when chorus is turned off.
CDP235R_e.book 15 ページ ２０１７年２月９日 木曜日 午後４時３２分
To Next Page
Loading...
Need help?
General
