Casio CDP-S360 - Filter Cutoff Frequency (4 AH); Vibrato Rate (4 CH); Vibrato Depth (4 DH)

Note1: For information about the relationship between setting values and send/receive values, see the “13.3 –64 - 0 - +63
Setting Value Table” in “IV Setting Values and Send/Receive Values” of this document.
Transmit Sent when MIDI setting of Accomp MIDI Out set to ON and when automatic accompani-
ment is used.
Receive Receipt makes a relative change in the time it takes for a note to rise to its maximum level.
7.15 Filter Cutoff Frequency (4AH)
Message Format: BnH 4AH vvH
n: MIDI Channel Number
vv: Value (Note1)
Note1: For information about the relationship between setting values and send/receive values, see the “13.3 –64 - 0 - +63
Setting Value Table” in “IV Setting Values and Send/Receive Values” of this document.
Transmit Sent when MIDI setting of Accomp MIDI Out set to ON and when automatic accompani-
ment is used.
Receive Receipt changes the filter cut-off frequency.
7.16 Vibrato Rate (4CH)
Message Format: BnH 4CH vvH
n: MIDI Channel Number
vv: Value (Note1)
Note1: For information about the relationship between setting values and send/receive values, see the “13.3 –64 - 0 - +63
Setting Value Table” in “IV Setting Values and Send/Receive Values” of this document.
Receive Receipt changes the note vibrato rate.
7.17 Vibrato Depth (4DH)
Message Format: BnH 4DH vvH
n: MIDI Channel Number
vv: Value (Note1)
Note1: For information about the relationship between setting values and send/receive values, see the “13.3 –64 - 0 - +63
Setting Value Table” in “IV Setting Values and Send/Receive Values” of this document.
Receive Receipt changes the depth of pitch modulation.
11