Casio Celviano AP-65R - Real-time Recording Procedure; Punch-in Recording Procedure

In
To start Auto Accompaniment part way into a record-
ing
place of step 5, press the SYNCHRO/ENDING button and then.
start playing on the melody keyboard to start recording without ac-
companiment. When you reach, she point where you want accompa-
iment to start, play a chord on the accompaniment keyboard to start
Auto Accompaniment.
To
use
real-time
recording
in
Tracks
2
through
6
ENOTES
It
you
are
performing
real-time
recording
in
Tracks
2
through
6
immedi
ty after you firishec
re
ime reccrding in Track 1, skip staps 1 and 2 of
the tollowing procedure
1
«Press the SONG button once.
*+ This causes the indicator lamp above the SONG button to
light
Select the user song area to which you want to record.
+ Use the [+] and (-] buttons to select User Song Area 0 {SG0)
or User Song Area 1 (SG1)
+ Change Mixer settings for the channel if you want. The Mix-
er settings you make for the channel are copied to applica-
ble track during cecording.
+ Select the tone you want.
+ Use Mixer CH) to select a tone. See “Selecting a Mixer Tone”
on page E-36 for more details.
« Press the RECORD button to enter record standby.
* The REC indicator appears, and the frame around the cur~
rently
selected
channel
(track)
flashes
on
the
display.
$60 TUNE 1
Ore
mo moron ny weno cus
IANAAGAAuGIVARACLOGAIOGHAGIQMUHOGAGAULAGUA ASAE LAD
a rs
a | 8) <>
Le
* CH 11 through CH 16 of the level meter show which teacks
already contain recorded data. See “Level Meter During
Record Operations” on page E-43 for details on how to read
the level meter.
+ Select the track to which you want to record,
© Use CHANNEL buttons CH12 (Irack 2} through CH16 (Track
6) to select the track you want,
CH cHi2 chia GHIA oma ce
a
mt 782 TRas Rt me
SEQUENCER TRACK
E46
&.. Press the START/STOP button to start recording,
+ At this time the REC indicator stops flashing.
+ The me:ronome rormally saunds during recording. f you
‘want to tura off the metronome, use the procedure under
"Metconome Setting (()" on page E-50.
«Play the notes you want to record on the keyboard,
After you ace finished, press the START/STOP button
to stop recording.
# The REC irdicator disappears from the display when record.
ing is stopped.
9.
acthis
point
you
can
‘epeal
steps
3
through
8
for
oth-
er tracks,
if you
want
Punch-in Recording
Note that the procedure you use for Track 1 is different from that for
Tracks 2 through 6.
PREPARATION
* Cetermine tne tones that you want lo use.
‘+ Set the tempo "nat you want to use during recarcing.
NOTES #
+ You can change rhythm while recording 1s in progress.
+ The previously recorded rhythm pattem is automatically selected at frst,
but
you
can
change
the
rhythm
during
punch-in
recording.
Cnanging
the rhythm during punch: ia recording, however, may cause the metro-
nove display and rhythm beat to be aut of synch with the chythm that is
playing
+ Ths tempo you use for recording does nol affect the tempo of the pley-
bask. This means you can record at a very slow tempo for easy play,
‘and then spaed up ine temps for playback
To use punch-in recording in Track 1
4. Press the SONG button once.
+ This causes the indicator lamp above the SONG button to
light.
> Select the user song area thal contains the song whose
contents you want to change using punch-in record-
ing
‘+
Use
the
(+]
and
[-]
buttons
to
select
User
Song
Area
0
(SG0)
‘or User Song Area 1 (SG).
$GG
TUNE1
2.
Select
the
tone
you
want.
+
Use
Mixer
Cf
to
select
a
tone.
See
“Selecting
a
Mixer
Tone”
‘on
page
E-36
for
more
details.
4,
Press
the
RECORD
button
to
enter
record
standby.
# The
REC
indicator
appears.
and
the
frame
around
the
CH11
(Track 1) flashes on the dispiay.
568
TUNE1
E
7
ee
a
eno nec noepesem
v
ate
at:
ca
+ CH 11 through CIT 16 of the level meter show whick. tracks
already contain recorded data. Sce “Level Meter During
Recard Operations” on page E-48 for details on how to read
the level meter,
+ [i there is nc accompaniment recorded yet, you can press the
SYNCHRO/ENDING button here to start recording along
with chythm and chord accompaniment.
5.
Press
the
ENTER
button
to
enter
the
Punch-in
Mode
ddidaidtiidi
SG&@Punch |n=
£., Press the START/STOP button to start playback of the
song in tne user song area you selected in step 2
When playoack reaches the par: you want to change,
play the new part on the keyboard
* Playback from memory stops ard recording begins as soon
as you play something on the keyboard
+ You can change the rhythm setting while recocding is in
progress.
» Continue playing until the end of the song,
suoPunch In?
ed
Tr er ET
* You can also change Auto Accompaniment chords during
punch-in recording by playing chords on the accompaniment
keyboard
« Ifa synchro start operation is already recorded in ‘Track 1,
playing something on the accompaniment keyboard starts
thythm play and records it.
See “Synchro Sta:ting Accompaniment with Rhythm Play”
on page E 29 o details on using synchro start
&. After you are finished, press the START/STOP button
to stop recording.
+ The REC indicator disappears from the display when record:
ing is stopped.
+
After
recording
is
stopped,
you
can
press
the
START/STOP
buttoa
Io playback
what you have just recorded.
See “Play-
ing Back from Seng Sequencer
Memory”
oa page E-49 for
details
on the lype of dala recorded
lo Song Sequencer
mem-
ory.
esoar.csea J OMAL-O5IA
i
a
i
i
4
To
use
punch-in
recording
in
Tracks
2
through
6
#NOTER
H you ave performing punch-in recording .n Tracks 2 through 6 mmediate.
ly ater you finished cunch=n recording n Track 1, skip steps 1 and 2 of
the following procedure.
i.
ka
Press the SONG button once.
* This causes the indicatar lamp above the SONG button to
light.
Select the user song area that contains the song whose
cantents you want ta change using punch-in record.
ing.
+ Use the (+] and [-] buttons to select User Song Area 0 (SG)
or User Song Area 1 (531)
Select the tone you want.
« Use Mixer CHI to select a tone. See “Selecting a Mixer Tone”
on page E-36 for more details,
Press the RECORD button to enter record standby.
+ The REC indicator appears, and the feame around the CH11
(Track 1) flashes on the display.
scaTUNE1
Weald
GUAT LILI
+ CH11 through CH 16 of the level meter show which tracks
alzeady contain recorded data. See “Level Meter During
Record Operations” on page E-48 for details on how to read
the level meter.
>
alt
=i
~.8|¢
3
Seiect the track whose contents you want to change.
+ Use CHANNEL buttons CH12 (Track 2) through CH16 (Track
6) to select the track you want
cum che OHI CHE His cate
ae ay ea
— SEQUENCER TRACK:
Press the ENTER button to enter the Punch-in Mode.
Sdddibbidididiy
SG&Punch
Ine
7YTTNT
+
Pressing
the
ENTER
button
again
exits
the
Punch-in
Mode.
Press
the
START/STOP
button
to
start
piayback
of
the
song
in
the
user
song
area
you
selected
in
step
2.
E-47