EN-12
Playing with Different Tones
1.
Press the SETTING button to display the
setting screen.
2.
Use the q and w arrow buttons to select
“General” and then press the ENTER button.
3.
Use the q and w arrow buttons to select
“Half Pedal Pos.”.
4.
Use the u (–) and i (+) arrow buttons to
change the setting value and adjust the half
pedal trigger position.
• +1 or greater: Deeper trigger position
–1 or less: Shallower trigger position
• The setting range is –2 to +2.
5.
Press the SETTING button to exit the setting
screen.
To adjust the half pedal trigger position
z H a l f P e d a l P o s .
GP500-ES-1C.indd 14 2015/10/28 14:20:35
To Next Page