10.1.1 Master Volume
Message Format: F0H 7FH ddH 04H 01H llH mmH F7H
dd: Device ID
ll: LSB Value(Receive:Ignored)
mm: MSB Value
Receive Receipt changes the Master Volume.
10.1.2 Master Fine Tuning
Message Format: F0H 7FH ddH 04H 03H llH mmH F7H
dd: Device ID
ll: LSB Value(Note1)
mm: MSB Value(Note1)
Note1: For information about the relationship between setting values and send/receive values, see “11.5 Fine Tuning Setting
Value Table” in “IV Setting Values and Send/Receive Values” of this document.
Transmit This message is sent when the tuning setting is changed.
Receive Receipt changes the tuning setting.
10.1.3 Master Coarse Tuning
Message Format: F0H 7FH ddH 04H 04H llH mmH F7H
dd: Device ID
ll: LSB Value(Transmit:00H,Receive:Ignored)
mm: MSB Value(28H - 58H)
Receive Receipt changes the Patch Master Coarse Tune parameter.
10.1.4 Reverb Type
Message Format: F0H 7FH ddH 04H 05H 01H 01H 01H 01H 01H 00H vvH F7H
dd: Device ID
vv: Value(Note1)
Note1: For information about the relationship between setting values and send/receive values, see “11.6 Reverb Type Setting
Value Table” in “IV Setting Values and Send/Receive Values” of this document.
Transmit This message is sent when the reverb type is changed. This Instrument treats a hall simulator
as a reverb.
Receive Receipt changes the reverb type.
17
To Next Page
Loading...
