Casio CFX-9850G PLUS Communications Manual

400
21-1 Connecting Two Units
The following procedure describes how to connect two units with an optional SB-
62 connecting cable for transfer of programs between them.
uu
uu
uTo connect two units
1. Check to make sure that the power of both units is off.
2. Remove the covers from the connectors of the two units.
•Be sure you keep the connector covers in a safe place so you can replace
them after you finish your data communications.
3. Connect the two units using the SB-62 cable.
SB-62 cable
•Keep the connectors covered when you are not using them.

Casio CFX-9850G PLUS Specifications

General

Display Type	LCD
Display Size	128 x 64 pixels
Graphing Capability	Yes
Programming	Yes, BASIC-like language
Memory	32 KB
Power Source	4 AAA batteries