EN-15
Controlling the Keyboard Sounds
The transpose feature lets you change the pitch, in semitone
steps. A simple operation lets you instantly change the pitch
to match that of a singer.
• The transpose setting range is –12 to +12 semitones.
1.
Press cs FUNCTION.
2.
Use the dk [–] and [+] keys to select the
transpose setting you want.
Use the tuning feature when you need to adjust the pitch
slightly to play along with another musical instrument. Also,
some artists perform their music with slightly altered tuning.
• The tuning feature specifies the frequency of the A4 note.
You can set a frequency within the range of 415.5 to
465.9 Hz. The initial default setting is 440.0 Hz.
• You can change the frequency in 0.1 Hz steps.
1.
Press cs FUNCTION and then use the ct [2]
(o) and [3] (p) keys to display “Tune”.
2.
Use the ct number keys, and the dk [–] and [+]
keys to adjust tuning (page EN-4).
• You can use the number keys to input the integer part
(left of the decimal point) of the value only. Use the (+)
and (–) keys to change the value to the right of the
decimal point.
Octave Shift lets you raise or lower the pitch of the keyboard
notes of each tone part (page EN-10) in octave units.
• The octave shift setting range is –3 to +3 octaves.
1.
Keep pressing cp LAYER until the screen
shown below appears on the display.
2.
Use the ct [2] (o) and [3] (p) keys to select
the tone part whose pitch you want to change.
3.
Use the dk [–] and [+] keys to shift the octave.
• This Octave Shift setting changes automatically when some
tones are selected. For details, see the “Key Octave Shift”
column of the tone list in the separate Appendix.
Changing the Pitch
(Transpose, Tuning, Octave Shift)
Changing the Pitch in Semitone Steps
(Transpose)
Fine Tuning (Tuning)
T u n e
4 4 0 . 0 H z
Octave Shift
U2 Oc t .
CTX700-ES-1A.indd 17 2017/10/05 11:03:15
To Next Page
Loading...
Need help?
General
Weight and Dimensions
