Casio CZ-3000 User Manual

•Line select It
16-note polyphonic for creation of simple sounds.
*
Line select
51
16-note polyphonic for monitoring LIME
L2]
during
[J
+
O
tone creation.
•Line select
CD
+
23
8-note polyphonic for creating sounds with complex harmonics structures. Same as
Q]
+
SI
when all detune values (OCT,
MOTE,
FINE)
are set to 0.
*
Line
select
3) +
IB
8-note polyphonic for ensemble and chorus effects. Same as
Q]
+
Q]
when all detune
values
(OCT
NOTE, FINE)
are set to 0.
*
When more than
8
keys
are pressed in 8-note polyphonic, the most recently
pressed keys
are usually given
priority,
RING
MODULATION
Pressing the RING key
causes an indicator to light above the key and
LIME
[B
and LINE
[3
output is ring modulated by LINE
d
, Pressing
the
RING key again will turn the func-
tion OFF.
Ring
modulation is only possible when LIME SELECT is set
to
[j]
+
\2\
or
m
+ HI
-
_vl^
Ring modulation is used when creating bell-type sounds.
NOISE MODULATION
Pressing
the
NOISE
key
causes an indicator
to
light above the key and LIME
CD
or LINE
GS
output is modulated by noise. Pressing the NOISE key again will turn the function
OFF- Noise modulation is only possible when LINE SELECT is set to
3]
+
BE
or
3]
+
[D
,
Noise modulation is used when creating
wind
or percussion sounds.
•The RING and NOISE keys mutually cancel each other
Extreme settings in the Parameter Section can result in no sound production at
all when the
range of possible sounds is exceeded.
INITIALIZE
This function returns parameters to their initial settings. Press the key that
corresponds
to the parameter
to
be initialized while holding the INITIALIZE key
down. The LCD will
then show the initialized status of the parameter.
{Example
1)
Initializing
the
VIBRATO values.
CDPress
and hold down the INITIALIZE key.
(^Simultaneously press
the
VIBRATO key,
lM*rn
<LCD>
WFIUE=1 DELflV=00
RflTE=00 DEPTH=00
PART 1 NORMAL
MODE
23

Casio CZ-3000 Specifications

General

Brand	Casio
Model	CZ-3000
Category	Synthesizer
Language	English