E-21
Removing
1. Make sure that the power on the terminal has been switched off. If the power is still
on, press the power key to switch off.
2. Remove the batteries and open the microSD card cover.
3. Catch the projecting lip with your fi ngertip as shown in the illustration and pull the
card out.
4. Close the microSD card cover and install the batteries.
Important!
A microSD card must be inserted with the top and bottom properly aligned
and in the proper direction. Attempt in inserting it with an excessive force in
incorrect orientation can risk damage to the connectors and slot.
Never turn off the power or remove a microSD card from the slot while the card
is being accessed. Doing so can damage the microSD card or data in the card.
Do not drop the card or lose it.
•
•
•
To Next Page
Loading...
Need help?
General