Casio DT-X200-10E Service Manual

– 64 –
DT-X200/DT-X8
(3) Removing the LCD-UNIT
1. Peel off the TAPE/LCD.
2. Remove the LCD-UNIT.
3. Remove the COIL-SPRINGs (4 pcs.).
COIL-SPRINGs
Notes on reassembling:
• Be sure that four COIL-SPRINGs are mounted on the case.
• Pass the FPC of the LCD into the groove of the I-CASE.
Tape/LCD

Casio DT-X200-10E Specifications

General

Brand	Casio
Model	DT-X200-10E
Category	Handhelds
Language	English