Casio DT-X200 - Page 37

– 34 –
DT-X200/DT-X8
12. Operation LED
No. Operation Display Test Details
1
Select
“
[ 6].Operation LED ” from
All Test MENU-2 screen.
Indicator 2
Indicator 2 (the right side LED)
lights in red and the whole screen
is displayed in red.
2
Press the “Enter” key.
(to be continued)
Indicator 2
Indicator 2 (the right side LED)
lights in green and the whole
screen is displayed in green.
3
Press the “Enter” key.
Indicator 2
Indicator 2 (the right side LED)
lights in blue and the whole screen
is displayed in blue.
4
Press the “Enter” key.
The judgment screen appears.
If displayed colors are correct (OK):
Press the “1” key.
If displayed colors are not correct
(Failure):
Press the “0” key.
Pressing the “1” or “0” key returns
you to the Menu screen.