115
Printing
. Connecting the Camera to a Printer
1. Turn off the camera. Next, rotate the cover lock dial in the [
4
OPEN]
direction and open the memory card/terminal cover.
2. Use the USB cable that
comes bundled with the
camera to connect the
camera to your printer’s
USB port.
• The camera does not
draw power over the USB
cable. Make sure the
camera’s battery is
sufficiently charged before
connecting.
• Make sure that you insert
the cable connector into
the USB/AV port until you
feel it click securely into
place. Failure to insert the
connector fully can result
in poor communication or
malfunction.
• Note that even while the connector is fully inserted,
you still will be able to see the metal part of the
connector as shown in the illustration.
• When connecting the USB cable to a USB port,
make sure you align the connector correctly with the
port.
USB cable
USB port
USB/AV port
Making sure that the 4 mark on the camera is
aligned with the 6 mark of the USB cable connector,
connect the cable to the camera.
Large
connector
Small connector
To Next Page
Loading...
Need help?
General
