145
Other Settings (Set Up)
Procedure
[MENU] * Set Up Tab * Auto Power Off
Auto Power Off turns off the camera whenever no camera operation is performed for
a preset amount of time.
Trigger Time Settings: 1 min, 2 min, 5 min (The trigger time is always 5 minutes in the
PLAY mode.)
• Auto Power Off is disabled under any of the following conditions.
– While the camera is connected to a computer or other device
– During a slideshow
– During “Ë Tracking”
– During interval snapshot or interval movie recording
– During Voice Recording playback or recording
– During movie recording and playback
Procedure
[MENU] * Set Up Tab * P Power On
• Change this setting to anything besides “Disable” before connecting to a TV for
image viewing.
Configuring Auto Power Settings (Auto Power Off)
Configuring [p] Setting (P Power On)
Power On Camera turns on whenever [p] (PLAY) is pressed.
Hold: On Camera turns on whenever [p] (PLAY) is held down.
Disable Camera does not turn on or off whenever [p] (PLAY) is pressed.
To Next Page
Loading...
