18
Quick Start Basics
The built-in rechargeable lithium ion battery of the camera is not charged when you
purchase it. Perform the steps below to charge the battery before using the camera.
You can use either of the two following methods to charge the battery.
• USB-AC adaptor
• USB connection to a computer
. To charge with the USB-AC adaptor
1. Turn off the camera.
Check to make sure that the camera’s monitor screen is
blank. If it isn’t, press [p] (Power) to turn off the camera.
2. After connecting the
supplied USB cable
to the USB-AC
adaptor, plug the
adaptor into a
household power
outlet.
3. Press the back of the monitor screen panel so the panel moves
towards you, and open the frame (page 13).
4. Hook your nail into the groove of the USB
port cover and pull the cover in the
direction indicated by the arrow to open
it.
First, charge the battery prior to use.
[p] (Power)
USB
USB-AC adaptor
Power cord
USB cable
(included with camera)
USB port
USB port cover
To Next Page
Loading...
Need help?
General
