76
Using the Camera with a Computer
Using the Camera with a Computer
You can perform the operations described below while the camera is connected to a
computer.
* Windows only
The procedures you need to perform when using the camera with your computer and
when using the bundled software are different for Windows and the Macintosh.
Things you can do using a computer...
Save images to a
computer and
view them there
• Save images and view them manually
(USB connection) (pages 78, 89).
• You can upload specific images to an
online service (CASIO Connection
powered by Eye-Fi
*) (page 82).
• Transfer images to a computer
automatically over a wireless LAN for
viewing (Eye-Fi) (page 93).
Transfer images
stored on your
computer to
camera memory
In addition to images, you also can transfer
screen shot images from your computer to
the camera (Photo Transport
*) (page 82).
Play back and
edit movies
• You can play back movies (pages 81, 92).
• To edit movies, use commercially
available software as required.
Transform
snapshots into
artistic images
Transform your snapshots into images that
look like they were painted (Virtual Painter 5
LE for CASIO
*) (page 83).
• Windows users should refer to “Using the Camera with a Windows Computer”
on page 77.
• Macintosh users should refer to “Using the Camera with a Macintosh” on page
88.
To Next Page
Loading...
Need help?
General
